generated project

README.md

@@ -0,0 +1,34 @@
+avr-calc
+========
+
+Rust project for the _Arduino Nano New Bootloader_.
+
+## Build Instructions
+1. Install prerequisites as described in the [`avr-hal` README] (`avr-gcc`, `avr-libc`, `avrdude`, [`ravedude`]).
+
+2. Run `cargo build` to build the firmware.
+
+3. Run `cargo run` to flash the firmware to a connected board.  If `ravedude`
+   fails to detect your board, check its documentation at
+   <https://crates.io/crates/ravedude>.
+
+4. `ravedude` will open a console session after flashing where you can interact
+   with the UART console of your board.
+
+[`avr-hal` README]: https://github.com/Rahix/avr-hal#readme
+[`ravedude`]: https://crates.io/crates/ravedude
+
+## License
+Licensed under either of
+
+ - Apache License, Version 2.0
+   ([LICENSE-APACHE](LICENSE-APACHE) or <http://www.apache.org/licenses/LICENSE-2.0>)
+ - MIT license
+   ([LICENSE-MIT](LICENSE-MIT) or <http://opensource.org/licenses/MIT>)
+
+at your option.
+
+## Contribution
+Unless you explicitly state otherwise, any contribution intentionally submitted
+for inclusion in the work by you, as defined in the Apache-2.0 license, shall
+be dual licensed as above, without any additional terms or conditions.